Monthly Archives: January 2016

Quoting an Elevated Concrete Floor – tag out the flatness risk!

The tolerances called up in table 5.2 NZS3109 “Tolerances for in-situ construction” are not achievable on elevated concrete floors. The relationship to datum is specified as +/-10mm. With  deflection and ongoing creep this is not going to be acheived. Then for flatness it references NZS3114 requirements. 5mm in 3m is also not going to be achieved 100% of occasions and if you have…

Conslab and Euro Merge to Accelerate Growth

We are delighted to inform you that we have agreed a business merger between Conslab Ltd and Euro Corporation Ltd. As of January 01, 2016, Conslab and Euro Corporation have been merged and Conslab will operate as a separate division of Euro Corporation. Our key managers Tim Walker, Andrew Dallas, Brian Mooney and Glyn Sutton,…

Back to top